Mitsubishi Electric DX-TL308E Instalační manuál Strana 68

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 164
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 67
68
To search for images using <Search menu>, there are 5
methods as follows:
Start point search
The oldest recorded image is searched for.
End point search
The latest recorded image is searched for.
Time and date search
Images are searched based on the date and time you
designate.
Alarm list search
Images are searched using the list of dates and times when
alarm recording and emergency recording started.
MD search
Images from cameras that detected motion are searched.
Searching for the oldest recorded data
<Start point search>
Step
1 Press the SEARCH button on the front panel of
the recorder.
<Search menu> is displayed.
You can display this menu also from the mouse
operation menu. (
Pages 30 to 31)
Step
2 Select a device to search under [Play device].
Step
3 Select [Execute search].
Execute search
A still image of the oldest recorded data stored in
the selected device is displayed in the single screen
display mode.
You cannot select a camera for search.
Tips
You can manipulate the image displayed as search
result using the buttons displayed on the search result
screen.
Following buttons are operated by a mouse only.
[
]: Each time you click this button, the size of the
search result screen changes. Each time you click
this button, it changes between
and . Click
to display the image on the entire screen and click
to display the image on one-quarter of the screen.
Images recorded in the CIF size cannot be displayed
on the entire screen.
[ ]: Each time you click this button, the reverse
playback speed changes in the order of approx. X2
approx. X4 approx. X8 approx. X16 high-
speed playback
approx. X2.
[
]: When you click this button, reverse frame-by-
frame playback starts.
[
]: When you click this button, reverse playback
starts.
[
]: When you click this button, playback/reverse
playback stops.
[
]: When you click this button, playback/reverse
playback pauses.
[
]: When you click this button, frame-by-frame
playback starts.
[
]: When you click this button, playback starts.
[
]: Each time you click this button, the playback
speed changes in the order of approx. X2
approx.
X4
approx. X8 approx. X16 high-speed
playback
approx. X2.
Notice
The intended playback speed may not be obtained
when a heavy load is imposed on the recorder or when
the high-speed data transmission is unavailable due to
the use of an external DVD/CD drive, USB memory, or
external HDD.
Searching for the latest recorded data
<End point search>
Step
1 Press the SEARCH button on the front panel of
the recorder.
<Search menu> is displayed.
You can display this menu also from the mouse
operation menu. (
Pages 30 to 31)
Step
2 Select a device to search under [Play device].
Step
3 Select [Execute search].
Execute search
A still image of the latest recorded data stored in
the selected device is displayed in the single screen
display mode.
You cannot select a camera for search.
Searching for images you want to view
Zobrazit stránku 67
1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 163 164

Komentáře k této Příručce

Žádné komentáře